You have no items in your shopping cart.
Subtotal: 0,00 €
Details
MSD Tändspole Blaster 2 Coil w/Ballast & Hardware
MSD Art no: 8203
Högeffekts tändspole. 0,7ohms motstånd primärt och 4,7ohms motstånd sekundärt. Medföljer en 0,8 ohms ballast resistor. Gummihatt och kontakt till tändkabeln ingår. Även adapter för att adaptera till s.k. HEI-kontakt ingår
Priset är per /st
Info på eng:
If you are looking to upgrade your stock coil, or want to compliment the performance of your MSD Blaster Ignition, MSD 5, 6 or 7, the Blaster Coil line is the right choice. All of the Blaster Coils are designed for improved spark output! Special 100:1 windings are used to provide maximum build-up of voltage! These windings are held secure and kept cool in an oil filled metal canister. The tower assembly is molded of durable alkyd material due to its high dielectric characteristics while wide spaced brass primary terminals prevent the possibility of spark. There are several versions of the Blaster Coil available. All of them have the same internal specifications, but have different housings or components. Each Blaster Coil can be used with a stock ignition, Blaster Ignition, MSD 5, 6 or 7 Ignition Control. Most late model vehicles with electronic ignitions do not require a ballast resistor, check your ignition and manufacturers specifications to determine if a ballast is required in your application.
The Blaster 2 Coils are supplied with a 0.8 ohm ballast resistor and a terminal and boot to fit most applications. The ballast resistor must be used with stock Points Ignition and Mallory Unilite applications.
| Turns ratio: | 100:1 |
| Primary resistance: | .7 OHMs |
| Secondary resistance: | 4.5K OHMs |
| Inductance: | 8 mH |
| Maximum voltage: | 45,000 Volts |
| Peak current: | 140 mA |
| Spark duration: | 350 uS |
| Weight: | N/A |
Additional Information
| SKU | BAP-051E |
|---|---|
| Delivery Time | 1-3 days |
